水环境指示生物筛选及水质评价方法研究

以齐齐哈尔市近30年地表水生物监测数据、理化监测数据为研究依据,提出一套基于指示生物的地表水体评价方法。该方法将地表水体划分为5个级别,并从中筛选出每个级别对应的指示生物,最终建立一套基于指示生物描述水体污染程度的评价体系。该方法以理化指标为基础,筛选多种优势种作为指示生物,对水体进行综合评价。相比单一生物监测评价指标,该评价方法更能反映整个生态系统状况,从而更客观地反映水体真实情况,有望为地表水体污染评价新方法的建立提供参考。     

全二维气相色谱-飞行时间质谱法分离复杂体系中7种指示剂 多氯联苯

采用全二维气相色谱-飞行时间质谱法(GC×GC TOF-MS)分析了混标样品Aroclor 1260、Aroclor 1254、Aroclor 1242中的多氯联苯(PCBs)单体,考察了在复杂体系下对7种PCBs指示剂的分离能力。结果表明,与优化柱系统的分离效果相比,136种单体的混标样品中共分离出121种单体,7种指示剂经一维和二维的保留时间及质谱定性,在121种单体的2D斑点图中清晰可辨。全二维对于复杂体系的PCBs和指示剂的分离表明其强大的分离能力和对于检测复杂体系中指示剂的分辨能力,对该类物质的定性和定量检测具有重要意义。     

淮河支流污染物综合降解系数动态测算

确定河流污染物综合降解系数动态变化规律对提高水环境容量测算精度和水环境管理具有重要意义。通过现场模拟法,采用一维稳态模型测算了淮河支流洪河五沟营-塔桥乡河段COD、氨氮和总磷在枯水期、平水期和丰水期的综合降解系数,COD、氨氮和总磷降解系数在各水期的关系为枯水期平水期丰水期,提出了建议值并利用实测浓度对计算结果进行了检验,结果表明,不同水期综合降解系数吻合情况较好。     

城市大气中挥发性有机化合物监测技术进展

挥发性有机物(VOCs)是臭氧及二次有机颗粒物(SOA)的主要前体物。近年来,我国逐步将VOCs纳入大气污染物控制体系。准确可靠的监测技术是大气VOCs研究及控制的重要前提保障。按照采样方法、分析方法 2个方面介绍并讨论了城市大气中VOCs的现有监测方法,较为详细地介绍了几类广泛采用的离线及在线监测技术,简要讨论了目前VOCs监测中存在的一些问题,展望了今后的发展趋势。     

钻屑法测定煤层H_2S含量

为了测定煤层硫化氢(H2S)含量,防治矿井H2S涌出,提出一种通过钻屑法测定煤层H2S含量的方法。在未受采动影响的新鲜煤壁,采用钻屑法取样,通过测定煤样H2S解吸量、取样过程损失量和H2S残存量确定煤层H2S含量。根据溶于水中H2S的p H值和色谱分析解吸气体中H2S体积分数,确定H2S解吸量;根据煤样解吸规律和气样H2S体积分数,确定H2S损失量;根据色谱分析残存气体中H2S体积分数,确定其残存量。用此方法,对山西某矿H2S涌出煤层进行现场和实验室测定。研究表明,该矿H2S含量为(4.465~6.701)×10-3m3/t。钻屑法测定煤层H2S含量是可行的,可以为矿井H2S治理提供基础数据。     

Overestimation of self-reported driving exposure: Results from the SHRP2 Naturalistic Driving Study

Objectives: The accuracy of self-reported driving exposure has questioned the validity of using self-reported mileage to inform research questions. Studies examining the accuracy of self-reported driving exposure compared to objective measures find low validity, with drivers overestimating and underestimating driving distance. The aims of the current study were to (1) examine the discrepancy between self-reported annual mileage and driving exposure the following year and (2) investigate whether these differences depended on age and annual mileage.

Methods: Two estimates of drivers’ self-reported annual mileage collected during vehicle installation (obtained via prestudy questionnaires) and approximated annual mileage driven (based upon Global Positioning System data) were acquired from 3,323 participants who participated in the Strategic Highway Research Program 2 (SHRP2) Naturalistic Driving Study.

Results: A Wilcoxon signed rank test showed that there was a significant difference between self-reported and annual driving exposure during participation in SHRP 2, with the majority of self-reported responses overestimating annual mileage the following year, irrespective of whether an ordinal or ratio variable was examined. Over 15% of participants provided self-reported responses with over 100% deviation, which were exclusive to participants underestimating annual mileage. Further, deviations in reporting differed between participants who had low, medium, and high exposure, as well as between participants in different age groups.

Conclusions: These findings indicate that although self-reported annual mileage is heavily relied on for research, such estimates of driving distance may be an overestimate of current or future mileage and can influence the validity of prior research that has utilized estimates of driving exposure.     

时间因素对钻屑瓦斯解吸指标K1值测定的影响分析

针对时间因素对钻屑瓦斯解吸指标K1测定结果的影响，采用恒温瓦斯放散试验深入分析钻屑瓦斯解吸指标K1测定理论的准确性，总结因时间因素导致K1值测定误差所带来的现场问题。研究结果表明:K1值的测定误差与时间关系密切，测定启动时间越晚，误差越大；测定启动时间由第1 min延后至第2 min，绝对误差和相对误差最大值分别增加0.081 cm3/(g·min1/2)和2.20%；高瓦斯压力条件矿井或煤层的局部高瓦斯压力区域、构造煤发育区的钻屑瓦斯解吸指标K1值测定结果偏低，测定误差偏大。研究结果可为煤与瓦斯突出预测水平的提升提供技术支撑。     

绿色生态城区规划及实践的比较研究

目前,是以提倡低碳环保、绿色生态城市为发展规划的社会,生态化建设正如火如荼地进行中。本文以中新天津生态城、曹妃甸唐山湾生态城、青岛中德生态园这三个地点作比较,以建设绿色生态城市规划协同、共生城市理念、混合开发和生态社区结构这几点进行了分析,总结了城区建设间的问题,并针对这些问题研究解决方案,以达到绿色生态区建设的目的。     

重质油储罐固定式泡沫灭火系统设计优化研究

通过重质油储罐的实体火灭火试验,获得了氟蛋白泡沫液和水成膜泡沫液的供给强度与灭火时间对应关系数据,确定了每种泡沫液扑救重质油储罐火灾的最低泡沫供给强度;以10 000 m3固定顶重质油储罐为例进行了泡沫系统设计计算,将优化设计方案与原有设计方案进行了对比,主要变化是泡沫发生器数量从4只提高至6~8只,泡沫主管线管径从DN200提高至DN250,泡沫消防泵流量也相应提高。优化后的储罐泡沫灭火系统提高了泡沫灭火能力,提升了系统的可靠性,降低了储罐火灾风险。     

Warm forming die design,Part II: Parting surface temperature response characterization of a novel thermal finite element modeling code

The majority of the research activities in the area of warm forming are concentrated on demonstrating or simulating the improved formability associated with forming lightweight materials such as aluminum alloys at elevated temperatures. However, the ability to design the proper thermal management system within the forming tool is a critical aspect to delivering this technology as a viable, stable production alternative to traditional stamping. This work begins to address the thermal stability issues of this process by examining the impact of process cycle time on the parting surface temperature response. Cycle times of 10, 15, 30, and 300 s were evaluated using a reciprocating surface and a self-heated experimental block of 1020 steel fitted with resistance cartridge heaters. The presented results indicate that cycle time does not significantly impact the steady-state temperature response at the parting surface for a well-insulated die that has proper thermal management. Parting surface experimental results were compared to values obtained numerically and through the use of the novel thermal finite element analysis software PASSAGE/Forming^®.